Laboratory EDI Ultra Pure Water System Clinical Lab Reagent Water
System
Product Description
The professional ultra-pure water machine can directly purify tap
water into ultra-pure water for laboratory use (primary, secondary
and tertiary).The Ultrapure water quality (25℃) resistivity ≥
18.25MΩ.cm. It meets the type 1 water quality requirements in the national
standards GB / T6682-2008, ASTM, DINIS03696, and NCCLS.
Technical Parameter
| Type | basic analytical type |
| Model | OK-EP10 |
| AC Voltage | 110/220V,50/60Hz |
| Flow Rate | 1.5-2L/min |
| Output | 10L/h |
| Feed Water Requirements | tap water, temperature 10~35℃,pressure 0.15-0.35Mpa;TDS:≤200mg/L |
| Water Quality | |
| Pure Water | conductivity:2-10μs/cm@25℃ |
| Ultra-pure Water | resistivity:18.25MΩ/cm@25℃, TOC:5-10ppb, bacteria: <1CFU/ml, particle: (>0.2μm) <1pc/ml |
| Application | preparation of solutions, reagents, and buffers; vessel washing;
physical and chemical testing and other routine quantitative and
qualitative analysis. |
Dimension(L*W*H-mm) | 410*300*500 |
Weight(kg) | 20 |
Product Features
1. Intelligent integrated control panel system ensure
full-automatic continuous water production, power on self-test,
water shortage protection alarm, power failure automatic
protection, ultra-low voltage protection, RO membrane automatic
flushing, etc.
2. Online detection of water quality resistance value, real-time
online display on the LCD screen.
3. No noise, low power, easy operation, touch key, adjustable
performance parameters.
4. Full automatic control of water tank, integrated structure of
reverse osmosis system.
5. The system adopts international quality accessories such as an
imported reverse osmosis membrane, imported silent booster pump,
etc.
6. Integrated design of overall equipment, simple appearance, and
small floor area.
7. The main machine is equipped with an independent water intake,
which is convenient for users' other water needs.
8. It fully meets the GB6682-2008 standard of Chinese laboratory
water specification.
